Dissertation > Excellent graduate degree dissertation topics show

Study on the Heat Integration Technology of High Ammonia Nitrogen Wastewater in the TMP Process

Author: ChiYuXia
Tutor: XuWenFang;ZuoXueJie
School: Shandong University
Course: Pharmaceutical Engineering
Keywords: TMP Wastewater Ammonia-nitrogen Treatment Steam Stripping Heat Integration
CLC: X703
Type: Master's thesis
Year: 2010
Downloads: 118
Quote: 0
Read: Download Dissertation

Abstract


Ammonia nitrogen is one of major pollution of water bodies; it is harmful to the natural environment and human body, while industrial wastewater is the main source of ammonia nitrogen in water. At present in China, ammonia nitrogen wastewater treatment, especially for high strength ammonia wastewater cost-effective treatment, is still a problem; therefore, the study of its treatment technology is of great practical significance.In this paper, based on extensive literature research, combined with examples of pharmaceutical companies wastewater treatment, in the light of the characteristics of production process for the TMP, ammonia at high concentrations and large quantity of wastewater discharge, considered the enterprises actual bearing capacity of operating costs, developed a heat-based integrated TMP high strength ammonia wastewater treatment technology.First of all we measured the content of ammonia nitrogen in wastewater is 6750mg/L, pH value is 8.0, Stripping experiments indicate that in order to make ammonia-nitrogen removal rate more than 90%, the wastewaters PH should be adjusted to about 11. Secondly, through systematic process simulation and optimization to high strength ammonia nitrogen wastewater treatment process, studied the stripping process, the number of theoretical plates, feed location, amount of vapor, operating pressure, water inlet temperature and the influence of other process parameters to ammonia nitrogen content in the drainage, ammonia nitrogen removal rate and by-product of ammonia concentration, then obtained the optimal process parameters. Last according to simulation results, through the initial analysis of the overall energy in the process, designed heat integration of wastewater treatment process flow, the annual cost savings than the traditional craft utility project is 3,600,000yuan, at the same time made the technical process of engineering design and techno-economic analysis. The actual data in the industrial application indicate that the average ammonia-nitrogen removal rate had achieved 92.3%, realized the need for industrial design. Research results and industrial applications show that:pretreat the TMP high strength ammonia wastewater by adjust pH value, and then treat it through heat-based integrated stripping process, in this way it can not only remove the high concentration of ammonia nitrogen in waste water cost-effectively, but also recover part of the TMP, at the same time by-product industrial ammonia. The technology has significant treatment effect, low operating costs and can have some economic benefits, have high value of popularization and application

Related Dissertations

  1. Dynamic Behavior of a Novel Distillation-evaporation-heat Pump Integrated System,TQ053.5
  2. Experimental Studies of Externally Heat-Integrted Double Distillation Columns (EHIDDiC),TQ053.5
  3. Feasibility Analysis of Heat-Integration Reactive Distillation Column,TQ053.5
  4. Simulation of Diabatic Distillation with Heat Integration between Column Sections,TQ051.81
  5. Research on Strategy and Applications of Heat Pump Distillation Process,TQ028.31
  6. Study on the Heat Integration in Complex Distillation System Synthesis,TQ021.8
  7. The Simulation for 6 Solvent Oil Separation Flowsheet from Raffinate Oil of Karamay,TE624
  8. Experimental and Simulation Study on Double Film Heat and Mass Transfer Process in the Ammonia/Water Gax Cycle,TK124
  9. Targeting and Design Methods for Industrial Water Networks,TQ085
  10. The Design and Simulation of Triethylenediamine Separation Process,TQ028
  11. Researches on Modeling, Dynamical Behavior and Controllability Analysis of a Novel Double-effect Distillation Process for Methanol Purification,TQ223.121
  12. Design and Energy Study of Multi-Component Separation of Extraction-Distillation,TQ021.8
  13. Strategy of Energy Saving and Simulation for Trimethylbenzene Distillation Process,TQ241.5
  14. Strategy Study of Saving Energy in Extractive Distillation Flowsheet Integration,TQ028.31
  15. Optimal Mathematical Model of Water-using Network with Different Structures,TQ085
  16. Study on Wastewater Purification Effect of the Free Surface Wetland with Different Substrates and Plant Combination,X703
  17. Study on Activated Carbon Supported Cerium Catalytic Ozone Oxidation of Chloramphenicol,X703
  18. Ion Exchange Removal of Hexavalent Selenium in Raw Water,X703
  19. Study on Fusion Characteristic and Mineral Change of Blends of Sludge and Coal,X703
  20. Modification and Application of the Waste Fluorgypsum and the Treating of High Concentrations Fluoride Wastewater,X703
  21. Technology Study on Bricks of City Waterworks Sludge,X703

CLC: > Environmental science, safety science > Processing and comprehensive utilization of waste > General issues > Wastewater treatment and utilization
© 2012 www.DissertationTopic.Net  Mobile